Farm House Blue Chicken Coop: Setup & Features Guide

Quick answer

Setting up your Farm House Blue Chicken Coop is straightforward with a flat-packed design and a few common tools. Focus on the pull-out tray and access ramp for easiest daily use.

Step-by-step setup guide

1. Unpack and check parts: Lay out all flat-packed pieces and hardware. Confirm you have the coop body panels, roof, ramp, pull-out tray, and screws. A common mistake is missing small parts, so use the included checklist.
2. Assemble the base and tray slot: Attach the floor panel and slide the metal-lined pull-out tray into its guide rails. Make sure the tray moves freely before securing the walls. A common mistake is forcing the tray after assembly, which can warp the rails. Test the tray movement before adding walls.
3. Attach side and back panels: Fix the side and back panels to the base using the provided screws. Keep the panels square by checking corners with a carpenter's square. A common mistake is over-tightening screws, which can split the wood.
4. Install the front door and ramp: Hang the large front door on its hinges, then attach the access ramp at a gentle angle. Ensure the ramp sits flush against the door opening so chickens can walk up easily. A common mistake is setting the ramp too steep, which discourages use. The ramp angle should be no steeper than 30 degrees.
5. Add the roof and weatherproofing: Secure the roof panels and check for gaps. Apply exterior wood sealant or paint if not pre-treated. A common mistake is skipping sealant on the roof edges, leading to leaks over time. Reapply sealant annually before winter.

Product features at a glance

• Farm House Green Chicken Coop: The Farm House Green Chicken Coop (same design as the Blue version) has a metal lined pull out tray for easy cleaning and a big front door with an access ramp. The pull-out tray lets you clean the coop in minutes without reaching inside, and the ramp makes it simple for even young or older hens to get in and out.