The Classic XL Grey rewards a tray-first routine
The Classic XL Grey 2 Tier Rabbit Hutch is designed around two removable metal-lined trays, one for the upper section and one for the lower play area. That single feature should shape how you clean it: work tray by tray rather than trying to strip the whole hutch at once.
The hutch also has a hinged opening roof and four doors, so you can reach the sleeping area, food area and both parts of the lower play area without dismantling anything. The lockable hatch between floors lets you keep your rabbits upstairs while you work below.
Cleaning features built into this hutch
- CLASSIC XL GREY 2 TIER RABBIT HUTCH: 2 removable metal-lined trays for cleaning, one for the top and one for the bottom. Lift each tray out separately so soiled bedding goes straight to the bin without scrubbing inside the hutch.

CLASSIC XL GREY 2 TIER RABBIT HUTCH - CLASSIC XL GREY 2 TIER RABBIT HUTCH: Hinged opening roof for easy cleaning. Open the roof to reach the upper sleeping and food areas from above rather than leaning through a door.
- CLASSIC XL GREY 2 TIER RABBIT HUTCH: Lockable hatch to stop animals going downstairs. Close the hatch to keep rabbits on one level while you clean the other.
- CLASSIC XL GREY 2 TIER RABBIT HUTCH: Plastic feet to avoid rot. The feet lift the base off the ground, so check and clear around them as part of each clean.
A two-tier cleaning routine, step by step
No preparation or operating instructions were supplied with this product record, so the sequence below is a practical routine built around the hutch's own features. Adjust it to your rabbits and your setup.
- 1. Move your rabbits to a safe run: Take them out of the hutch before you open trays or the roof, and keep them away from cleaning products.
- 2. Close the lockable hatch: With the hatch locked, the two floors stay separate, so debris from the upper tray does not fall onto the lower play area.
- 3. Open the hinged roof and lift the top tray: Remove the upper metal-lined tray and tip the soiled bedding into a bag or bin.
- 4. Clean the lower play area through its two doors: The lower section has two doors for the large play area, so you can lift the second tray out without removing the ramp.
- 5. Wipe the metal-lined trays: The trays are metal-lined, which makes them straightforward to wipe down. Let them dry fully before refilling.
- 6. Check the ramp and hatch: Clear bedding and debris from the ramp and around the hatch so your rabbits can move between floors freely.
- 7. Refill with bedding and reopen the hatch: Replace both trays, add fresh bedding, and unlock the hatch so your rabbits can use the full two-tier space again.
Bedding tips for a hutch with two floors
- Treat the two trays as separate zones: The upper and lower trays are both removable, so you can change one without disturbing the other. The lower play area is equal in size to the run area above, so expect it to collect just as much bedding and debris.
- Keep the ramp clear: The ramp is the only route between floors. Bedding piled at either end can block it, so keep the ramp mouth clear when you refill the trays.
- Watch the area around the plastic feet: The plastic feet are there to avoid rot. Damp bedding pressed against them works against that, so keep the base and feet clear.
- Use the four doors for spot checks: The hutch has four doors covering the sleeping area, food area and both parts of the lower play area. A quick check through each door between full cleans catches soiled bedding early.
What the hutch dimensions mean for cleaning
The Classic XL Grey measures 122cm (L) x 45cm (D) x 89cm (H). The 45cm depth is the number to keep in mind: it is shallow enough that reaching the back of each tray through the doors or open roof is manageable, but you will still want to lift the trays out rather than clean around your rabbits.
The hutch is built with a wooden back and two wire sides rather than plywood, and it is finished in grey with white framing. The wire sides give you a view into the hutch from outside, which helps you spot soiled bedding before it becomes a bigger job.
Hygiene checkpoints between deep cleans
- Check both trays daily: Lift a corner of the bedding in each tray to see what is underneath, rather than judging by the surface alone.
- Look along the ramp and hatch: Debris collects where rabbits move most. Clear the ramp and the hatch opening as part of the daily check.
- Inspect the locks and hinges: The hutch has fox-resistant galvanised locks. Check they still close cleanly after cleaning, since a lock that does not seat properly defeats the purpose.
- Check the feet and base edges: The plastic feet are designed to avoid rot. Wipe up spills around them and make sure water is not pooling under the hutch.


